Home > Archive > Archive Computers >

Technical Details for Axis Storpoint CD E100 IDE


Technical Details for Axis Storpoint CD E100 IDE Archive Computers
Axis Storpoint CD E100 IDE 
Description: Model ID 0101-001-01 / Axis StorPoint CD E100 IDE - CD-ROM server - EN, Fast EN - plug-in module / The Axis StorPoint CD E100 IDE CD/DVD server is a full-featured AXIS storage product, so it will support the same features as the SCSI version among others: hard disk caching for up ... more
Axis Storpoint CD E100 IDE ... to 255 CDs; CD-R and CD-RW writing; full protocol support; NetWare PureIP.

Since the hard drives are much cheaper, it is a very good idea to base products on the AXIS StorPoint CD E100 IDE if a cheap caching solution is required, e.g. use to replace medium sized CD jukeboxes. This will bring down the price for the end user, while not sacrificing much in performance, reliability or features.

More Axis computers     

Technical Details for Axis Storpoint CD E100 IDE

PDF - Print the technical details

General
Device TypeCD-ROM server
Width14.9 cm
Depth20.9 cm
Height4.3 cm
Weight0.7 kg
Processor / Memory / Storage
Processors Installed1 x Axis ETRAX 100 100 MHz RISC
Max Supported Qty1
RAM Installed ( Max )32 MB ( 160 MB )
Flash Memory Installed (Max)4 MB Flash
Networking
Form FactorPlug-in module
Connectivity TechnologyWired
Data Transfer Rate100 Mbps
Data Link ProtocolEthernet, Fast Ethernet
Switching ProtocolEthernet
Network / Transport ProtocolTCP/IP, IPX/SPX, AppleTalk, UDP/IP, NetBEUI/NetBIOS
Remote Management ProtocolSNMP
Communication ModeHalf-duplex, full-duplex
FeaturesFull duplex capability, manageable
Compliant StandardsIEEE 802.3, IEEE 802.3u
Expansion / Connectivity
Expansion Slots Total (Free)Memory
Interfaces1 x network - Ethernet 10Base-T/100Base-TX - RJ-45 - 1
4 x storage - IDE - 40 PIN IDC - 4
Software / System Requirements
Software IncludedDrivers & Utilities
OS RequiredMicrosoft DOS, IBM OS/2, UNIX, Microsoft Windows NT 3.51 or later, Microsoft Windows 95/98, Novell NetWare 3.11 or later
Manufacturer Warranty
Service & Support3 years warranty
Service & Support DetailsLimited warranty - parts and labour - 3 years - carry-in
Environmental Parameters
Min Operating Temperature5 °C
Max Operating Temperature40 °C
Humidity Range Operating20 - 80%
 
Write a review
Product of the week
Axis Storpoint CD E100 IDE