Home > Computer > Bridge / Router >

Technical Details for 3Com NETBuilder II DPE Plus


Technical Details for 3Com NETBuilder II DPE Plus Bridge / Router
3Com NETBuilder II DPE Plus 
Description: Model ID 3C6091A / 3Com NETBuilder II DPE Plus - Router - plug-in module / The Dual Processor Engine (DPE) series module is the central processor for the NETBuilder II system. It includes a flash memory drive for the system software as well as a second flash memory drive for ... more
3Com NETBuilder II DPE Plus ... back-up. Firmware parameters set with the software SysconF command and with the firmware boot monitor are stored on the flash PROM (FPROM). A console port on the front of the module provides local management. The DPE module, in combination with the 800 Mbps backplane, delivers consistently high throughput for all interface ports.

More 3Com bridges & routers     

Technical Details for 3Com NETBuilder II DPE Plus

PDF - Print the technical details

General
Device TypeRouter
Form FactorPlug-in module
Width27.7 cm
Depth23.8 cm
Height2.6 cm
Weight0.6 kg
Processor
Type1 x AMD Am29040 62.5 MHz RISC
Memory
RAM80 MB (installed) / 80 MB (max) - SIMM 72-PIN
Networking
Status IndicatorsPort status, power, test mode
Expansion / Connectivity
Expansion Slots Total (Free)2 ( 2 ) x PC Card
2 ( 0 ) x memory - SIMM 72-PIN
Interfaces1 x management - RS-232 - 9 pin D-Sub (DB-9) - 1
Compatible Slots1 x Expansion Slot
Miscellaneous
Mounting KitStandard
Software / System Requirements
Software IncludedDrivers & Utilities
Environmental Parameters
Min Operating Temperature5 °C
Max Operating Temperature40 °C
Humidity Range Operating20 - 80%
 
Write a review
Product of the week
3Com NETBuilder II DPE Plus