|
Cisco 2509
Mission-specific models contain less memory and less hardware functionality to support a subset of protocols. Each mission-specific model can be upgraded to full router capability by downloading a new Cisco IOS software feature set and, if necessary, adding memory. |
||
Technical Details for Cisco 2509
PDF - Print the technical details
| General | |
| Device Type | Router |
| Form Factor | Rack-mountable - modular |
| Width | 44.5 cm |
| Depth | 26.8 cm |
| Height | 4.4 cm |
| Weight | 4.5 kg |
| Processor | |
| Type | 1 x Motorola 68030 20 MHz RISC |
| Max Supported Qty | 1 |
| Memory | |
| Flash Memory | 8 MB (installed) / 16 MB (max) |
| Networking | |
| Connectivity Technology | Wired |
| Data Transfer Rate | 10 Mbps |
| Data Link Protocol | Ethernet, Frame Relay, ASCII, PPP, serial |
| Network / Transport Protocol | TCP/IP, IPX/SPX, SLIP, PPPoE |
| Remote Management Protocol | SNMP, Telnet |
| Communication Mode | Full-duplex |
| Features | Flow control, full duplex capability, manageable |
| Compliant Standards | IEEE 802.3 |
| Expansion / Connectivity | |
| Interfaces | 1 x management - console - RJ-45 - 1 1 x management - auxiliary - RJ-45 - 1 2 x serial - synchronous - 60 pin D-Sub (DB-60) - 2 1 x network - Ethernet AUI - 15 pin D-Sub (DB-15) - 1 8 x serial - asynchronous - 68 pin HD D-Sub (HD-68) - 1 |
| Miscellaneous | |
| Cables (Details) | 1 x network adapter 1 x serial cable 3 x serial adapter |
| Rack Mounting Kit | Included |
| Authentication Method | CHAP, TACACS |
| Power | |
| Power Device | Power supply - internal |
| Voltage Required | AC 110/220 V ( 50/60 Hz ) |
| Power Consumption Operational | 40 Watt |
| Software / System Requirements | |
| OS Provided | Cisco IOS |
| Manufacturer Warranty | |
| Service & Support | 3 months warranty |
| Service & Support Details | Limited warranty - 3 months |
| Environmental Parameters | |
| Min Operating Temperature | 0 °C |
| Max Operating Temperature | 40 °C |
| Humidity Range Operating | 5 - 95% |


