|
Cisco 7204 VXR/CPE
Cisco's PA-E3 Packet-over-E3 port adapter for the Cisco 7200 Series router offers high-density, highly manageable E3 line termination. Demand for high- capacity corporate backbones, high- speed access to the global Internet, and trunking connections for service provider internetworking has led to growth in clear-channel E3 connections that has outpaced all other types and speeds of leased lines. This growth has placed tremendous strains on the abilities of service providers and network managers to provision and manage new E3 connections. With integrated line interface units data service units (DSUs) that allow E3 lines to be directly terminated on a Cisco router, the Cisco PA-E3 port adaptor simplifies E3 line management, reduces provisioning cost, and frees valuable rack space. |
||
Technical Details for Cisco 7204 VXR/CPE
PDF - Print the technical details
| General | |
| Device Type | Router |
| Form Factor | External - modular |
| Width | 42.7 cm |
| Depth | 43.2 cm |
| Height | 13.3 cm |
| Processor | |
| Type | 1 x MIPS RM5271 262 MHz |
| Max Supported Qty | 1 |
| Memory | |
| RAM | 128 MB (installed) / 256 MB (max) |
| Networking | |
| Connectivity Technology | Wired |
| Line Rate | E-3 |
| Framing Format | G.703 |
| Data Link Protocol | Ethernet, ATM, Fast Ethernet, HDLC, Frame Relay, PPP |
| Switching Protocol | Ethernet |
| Network / Transport Protocol | TCP/IP, UDP/IP, PPPoA |
| Routing Protocol | OSPF, IGRP, RIP, IS-IS, BGP, EIGRP, HSRP |
| Remote Management Protocol | SNMP, Telnet, HTTP |
| Communication Mode | Half-duplex, full-duplex |
| Status Indicators | Port transmission speed, power, link OK |
| Features | Flow control, modular design, full duplex capability, Layer 2 switching, auto-sensing per device, DHCP support, VPN support, BOOTP support, ARP support, MPLS support, VLAN support, manageable, IPv6 support |
| IP Telephony | |
| VoIP Protocols | H.323, SIP |
| Expansion / Connectivity | |
| Expansion Slots Total (Free) | Expansion Slot 2 PC Card Memory |
| Interfaces | 2 x network - Ethernet 10Base-T/100Base-TX - RJ-45 1 x management - console - RJ-45 1 x management - auxiliary - RJ-45 1 x network - E3 - BNC x 2 |
| Miscellaneous | |
| Authentication Method | Secure Shell (SSH), RADIUS, PAP, CHAP, TACACS |
| Compliant Standards | NEBS level 3, FCC Class A certified, CSA, EN 60950, IEC 61000-3-2, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC950, UL 1950, VCCI-II, CSA 22.2 No. 950, EN55022 Class B, AS/NZ 3548 Class A |
| Power | |
| Power Device | Power supply - redundant |
| Installed Qty / Max Supported Qty | 1 (installed) / 2 (max) |
| Voltage Required | AC 120/230 V ( 50/60 Hz ) |
| Power Provided | 280 Watt |
| Software / System Requirements | |
| OS Provided | Cisco IOS 12.2(5) |
| Software Included | Cisco IOS IP |
| Environmental Parameters | |
| Min Operating Temperature | 0 °C |
| Max Operating Temperature | 40 °C |
| Humidity Range Operating | 10 - 90% |


