Home > Computer > Bridge / Router >

Technical Details for Cisco 888 G.SHDSL Router with 3G


Technical Details for Cisco 888 G.SHDSL Router with 3G Bridge / Router
Cisco 888 G.SHDSL Router with 3G 
Description: Model ID CISCO888G-K9 / Cisco 888 G.SHDSL Router with 3G - Router + 4-port switch - DSL modem / wireless cellular modem - EN, Fast EN - Cisco IOS Advanced Security / Cisco 880 Series Integrated Services Routers are the next generation of fixed-configuration routers that provide ... more
Cisco 888 G.SHDSL Router with 3G ... collaborative business solutions for secure data communication to small businesses and enterprise teleworkers. The 3G wireless on the Cisco 880G series routers offers a cost-effective, rapidly deployable, reliable, and secure backup solution. With data rates approaching T1 speeds, 3G wireless can be used for primary WAN connectivity in locations where wireline services such as DSL and ISDN are not available or are too expensive to deploy.

The Cisco 880G Series Integrated Services Routers support the 3G standards (High-Speed Packet Access and EVDO Rev A) and are backward-compatible with Universal Mobile Telecommunications Service (UMTS), Enhanced Data rates for Global Evolution (EDGE), General Packet Radio Service (GPRS), and EVDO Rev0/1xRTT.

Technical Details for Cisco 888 G.SHDSL Router with 3G

PDF - Print the technical details

General
Device TypeRouter
Form FactorExternal
Width32.5 cm
Depth24.9 cm
Height4.4 cm
Memory
RAM256 MB (installed) / 768 MB (max)
Flash Memory128 MB
Networking
Connectivity TechnologyWired
Integrated Switch4-port switch
Data Link ProtocolEthernet, Fast Ethernet
Switching ProtocolEthernet
Network / Transport ProtocolL2TP, IPSec, PPPoE, PPPoA
Routing ProtocolOSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, PIM-SM, GRE
Remote Management ProtocolTelnet, SNMP 3, HTTP, HTTPS
CapacityIPSec VPN tunnels : 20
Status IndicatorsPort status, power
FeaturesNAT support, power over Ethernet (PoE), VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), content filtering, DiffServ support, MAC address filtering, Broadcast Storm Control, IPv6 support, Intrusion Prevention System (IPS), Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), DHCP server
Compliant StandardsIEEE 802.1D, IEEE 802.1Q, IEEE 802.1x
Communications
TypeDSL modem / wireless cellular modem
Protocols & SpecificationsITU G.991.2 (G.shdsl)
Expansion / Connectivity
Expansion Slots Total (Free)1 ( 1 ) x ExpressCard
1 ( 1 ) x memory
Interfaces4 x network - Ethernet 10Base-T/100Base-TX - RJ-45
1 x management - console - RJ-45
1 x modem - SHDSL ( WAN )
1 x USB - 4 PIN USB Type A
1 x modem - ISDN BRI ST - RJ-45 ( WAN )
1 x mobile phone
Miscellaneous
Encryption AlgorithmDES, Triple DES, SSL, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Authentication MethodRADIUS, TACACS+
Compliant StandardsVCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1
Power
Power DevicePower adapter - external
Voltage RequiredAC 120/230 V ( 50/60 Hz )
Power Provided60 Watt
Software / System Requirements
OS ProvidedCisco IOS Advanced Security
Environmental Parameters
Min Operating Temperature0 °C
Max Operating Temperature40 °C
Humidity Range Operating10 - 85%
 
Write a review
Product of the week
Cisco 888 G.SHDSL Router with 3G