|
Huawei Quidway SecPath 100V
With Dynamic VPN Technology, branch nodes can automatically create tunnel to realize connections, largely reduce the pressure of appliance in headquarter and cost of management. |
||
Technical Details for Huawei Quidway SecPath 100V
PDF - Print the technical details
| General | |
| Device Type | Router |
| Form Factor | External |
| Built-in Devices | Led panel |
| Width | 43.6 cm |
| Depth | 42 cm |
| Height | 4.4 cm |
| Weight | 2 kg |
| Processor | |
| Type | 79RC32365 |
| Memory | |
| RAM | 128 MB SDRAM |
| Networking | |
| Connectivity Technology | Wired |
| Integrated Switch | 4-port switch |
| Data Link Protocol | Ethernet, Fast Ethernet |
| Switching Protocol | Ethernet |
| Network / Transport Protocol | TCP/IP, PPTP, UDP/IP, L2TP, NTP, IPSec, PPPoE |
| Routing Protocol | OSPF, RIP-1, RIP-2, VRRP, static IP routing, GRE |
| Remote Management Protocol | SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, HTTP |
| Communication Mode | Half-duplex, full-duplex |
| Performance | 3DES throughput : 60 Mbps Throughput : 300 Mbps |
| Capacity | Concurrent connections : 150000 Security policies : 2000 VPN tunnels : 2000 |
| Status Indicators | Link activity, port duplex mode, power, 100M device connected, status |
| Features | Firewall protection, DHCP support, NAT support, VPN support, PAT support, MPLS support, VLAN support, auto-uplink (auto MDI/MDI-X), traffic shaping, packet filtering, ALG support, dynamic DNS server, MAC address filtering, IP address filtering, Low-latency queuing (LLQ), Weighted Fair Queuing (WFQ), Weighted Random Early Detection (WRED), SMTP traffic control, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS) |
| Compliant Standards | IEEE 802.1Q |
| Expansion / Connectivity | |
| Interfaces | 4 x network - Ethernet 10Base-T/100Base-TX - RJ-45 1 x network - Ethernet 10Base-T/100Base-TX - RJ-45 ( WAN ) 2 x serial - RS-232 - RJ-45 |
| Miscellaneous | |
| Encryption Algorithm | DES, Triple DES, MD5, AES, IKE, SHA-1, PKI |
| Authentication Method | Secure Shell (SSH), RADIUS |
| Power | |
| Power Device | Power supply - internal |
| Voltage Required | AC 120/230 V ( 50/60 Hz ) |
| Power Consumption Operational | 9 Watt |
| Environmental Parameters | |
| Min Operating Temperature | 0 °C |
| Max Operating Temperature | 40 °C |
| Humidity Range Operating | 10 - 90% |


