|
Juniper J-series Services Router J4300
PRODUCT FEATURES: Modular 6-PIM-slot form (8xT1/E1 deployments). |
||
Technical Details for Juniper J-series Services Router J4300
PDF - Print the technical details
| General | |
| Device Type | Router |
| Form Factor | External - modular - 2U |
| Installed Modules Qty (Max) | 0 (installed) / 6 (max) |
| Width | 43.2 cm |
| Depth | 48.9 cm |
| Height | 8.9 cm |
| Weight | 8.8 kg |
| Localisation | Europe |
| Memory | |
| RAM | 256 MB (installed) / 1 GB (max) |
| Flash Memory | 256 MB |
| Networking | |
| Connectivity Technology | Wired |
| Data Link Protocol | Ethernet, Fast Ethernet, HDLC, Frame Relay, PPP |
| Network / Transport Protocol | IPSec, PPPoE |
| Routing Protocol | OSPF, IS-IS, RIP-2, BGP, DVMRP, VRRP, PIM-SM, static IP routing, PIM-DM, IGMPv3, PIM-SSM |
| Remote Management Protocol | SNMP 2, Telnet, SNMP 3, HTTP |
| Features | Modular design, firewall protection, 168-bit encryption, DHCP support, NAT support, VPN support, MPLS support, LDAP support, Syslog support, traffic shaping, DoS attack prevention, content filtering, manageable, IPv6 support, High Availability, firmware upgradable, DDos attack prevention |
| Compliant Standards | IEEE 802.1Q |
| Expansion / Connectivity | |
| Expansion Slots Total (Free) | 6 ( 6 ) x Expansion Slot 2 memory |
| Interfaces | 2 x network - Ethernet 10Base-T/100Base-TX - RJ-45 1 x USB |
| Miscellaneous | |
| Encryption Algorithm | DES, Triple DES, MD5, SHA-1 |
| Authentication Method | SecurID, Secure Shell (SSH), RADIUS, LDAP |
| Compliant Standards | CE, ETSI, CSA, UL, VCCI Class B ITE, BSMI CNS 13438 Class B, cUL, CB, FCC Part 15 B, FCC Part 68 / CS03 Issue 8, EMC, CS-03, EN300-386 |
| Power | |
| Power Device | Power supply |
| Voltage Required | AC 120/230 V ( 50/60 Hz ) |
| Software / System Requirements | |
| OS Provided | JUNOS |
| Environmental Parameters | |
| Min Operating Temperature | 0 °C |
| Max Operating Temperature | 40 °C |
| Humidity Range Operating | 5 - 95% |


