Home > Computer > Bridge / Router >

Technical Details for Lucent Access Point 300


Technical Details for Lucent Access Point 300 Bridge / Router
Lucent Access Point 300 
Description: Model ID 700213614 / Lucent Access Point 300 - Router - ISDN - EN, ISDN, Fast EN / The Access Point 300 is ideally suited for small and medium-sized branch office enterprise locations and is offered in five fixed configurations that meet international standards. All its ... more
Lucent Access Point 300 ... configurations provide two 10/100 Ethernet ports and an ISDN BRI interface with the same performance metrics. The configurations differ in WAN interfaces supported.

Users can migrate from basic IP access to more advanced virtual private network (VPN) and Service Level Agreement (SLA) managed solutions with a single, purpose-built IP services platform. The integrated traffic measurement and monitoring capabilities allow detailed charge back, service level monitoring and enhanced network planning. And as a fully Simple Network Management Protocol (SNMP) managed system, Access Point 300 is easily integrated into existing management systems and back-office services.

Technical Details for Lucent Access Point 300

PDF - Print the technical details

General
Device TypeRouter
Form FactorExternal
Width22 cm
Depth15.7 cm
Height3.2 cm
Weight2.7 kg
Enclosure ColourBlack
Processor
Type1 x Motorola MPC8260 133 MHz RISC
Max Supported Qty1
Memory
RAM64 MB SDRAM
Networking
Connectivity TechnologyWired
Line RateT-1/E-1
Data Transfer Rate50 Mbps
Data Link ProtocolEthernet, ISDN, Fast Ethernet
Switching ProtocolFrame Relay, Ethernet
Network / Transport ProtocolTCP/IP, UDP/IP, L2TP, IP/IPX, IPSec
Routing ProtocolOSPF, RIP, BGP-4, RIP-2, IGMPv2
Remote Management ProtocolSNMP 2, SNMP 3, HTTP
FeaturesFirewall protection, 56-bit encryption, routing, 168-bit encryption, IP-routing, NAT support, CHAP authentication, PAP authentication, Triple DES, DES, VPN support, manageable
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.1p
Communications
Type1 x ISDN terminal adapter
Digital Signaling ProtocolISDN BRI
Expansion / Connectivity
Expansion Slots Total (Free)Memory
Interfaces2 x network - Ethernet 10Base-T/100Base-TX - RJ-45 - 2
1 x network - ISDN BRI ST - RJ-45 - 1
2 x network - T1/E1 - RJ-48C - 2 ( WAN )
2 x management - RS-232 - RJ-45 - 2
Miscellaneous
Rack Mounting KitNot available
Power
Power DevicePower supply
Voltage RequiredAC 110/220 V ± 10% ( 50/60 Hz )
Power Consumption Operational20 Watt
Software / System Requirements
Software IncludedDrivers & Utilities, Access Point QVPN Builder
Environmental Parameters
Min Operating Temperature0 °C
Max Operating Temperature40 °C
Humidity Range Operating10 - 85%
 
Write a review
Product of the week
Lucent Access Point 300