* Prices may differ from that shown
This is an excellent saw, and although not as powerful and universal as the industrial ones (which I covet) this is a reliable and versatile workhorse. Of course being made by DeWalt you know you are getting good quality.
It is possible to grab a bandsaw of similar design for just over £100 and I also have one of those. But the cheaper saws do struggle with any wood thicker than about 6mm despite using good quality blades. So this beast manages to cut the oak and chestnut with no issues.
I have managed to cut through greenwood and 1.5" thick seasoned hardwood using this saw.
Bandsaws are great for DIY and crafting. You can use them for cutting skirting, planks, or for furniture making. I use mine for Luthiery.
I tend to run mine on the high speed setting unless I am cutting out scrolls or lots of curves.
I use the best quality blade that I can afford. My advice would be to research blades and teeth per inch etc to get the best from your saw.
This requires a bit of setting up and fine tuning to get it to cut true.
The bottom guides are a little fiddly to access but nothing that cannot be done with a bit of patience.
there are lots of videos on YouTube which guide you through the optimum set up for a bandsaw and it is well worth researching this before you cut an expensive piece of timber or else your cut will be on the wonk and you will swear a lot ( bitter experience!)
I use a range of blades from 1/4" to 3/4 " with no problems but it pays to buy the best quality blades you can afford.
The saw has an alloy table which is perfectly stable and sturdy.
All in all this is an excellent saw although somewhat pricy compared to others of a similar design. I still think it better than the cheaper ones available though and having used a fair few, this is up there in my favourites, only superceded by a Hegner (well a girl can dream)
- 2 speed Bandsaw.
- Rigid all steel welded construction for durability.
- 0-45º Tilt table for bevel cutting.
Power Input 1100 Watts
Max. Cutting Height. 200mm.
Max. Cutting Width. 315mm.
Cutting Speeds 380 - 880 m/min.
Table Size. 500 x 500mm.
Supplied with G.P. Blade, no volt release switch, leg stand, mitre and rip fence.
All steel welded construction provides extreme rigidity and accuracy even at maximium depths of cut
Fitted with high quality precision blade, designed to stay sharp for up to 10 times as long as standard blade types
500 x 500 mm aluminium extruded table provides a large support area built for flatness and accuracy
Easy to adjust blade tensioning with integrated tension indicator for different blade types and applications
310 mm throat and 200 mm depth capacity for large workshop applications
Micro switch incorporated in door to prevent accidental starting while open
100 mm dust extraction port for efficient dust control
Two speed control for various applications
Powerful induction motor for long maintenance free life and low noise
The Dewalt DW876 Bandsaw has an all steel welded construction and is fitted with a high quality precision blade that's designed to stay sharp up to 10 times as long as standard blades.