|
Belkin USB Hub
by NotMyToothbrush
I bought this USB hub as I ran out of the built in buses in my laptop - they were already being used by my mouse, keyboard, external hard drives, camcorders etc... This hub, as it was able to convert 1 hub into 4 meant that I could connect many more devices to my system.
The design of this hub is... ok... I have seen better in ... the past and this is quite chunky to many I have used before. All of the USB ports are along one side, if they placed two on each side they may have been able to almost half the size of the hub and make it easier to carry around in my laptop bag. However, this would sacrifice the convenience of only having to look at one side and also, by having all on one side, cable management is easier and there is a reduced chance of them tangling.
A big issue with many USB hubs is that if too many devices are used (even if all ports are not used) they could draw too much current than the single USB hub which it is feeding off can supply. For example, if a USB hub can supply 4 Amps of current and 4 devices were connected to the hub, they would only work if the total current needed by the devices totalled 4 Amps or less - If two of the devices used 2 Amps, there would be no current for the other devices and they would not work. This USB hub solves this issue as it is a powered USB hub and has its own external power supply. You simply connect the hub up to your mains power as well as the computer and theoretically can have an unlimited number of devices from a single hub.
The power adapter, despite bringing the functionality listed above, does add to the chunkiness of the hub when transporting and can make it awkward to carry the hub around with you in a bag. Read the complete review |
|
Belkin F5U416
by tirial
The Belkin ClipOn hub is a 4-port USB hub with its own optional power supply, designed to clip over the edge of desks and be easily portable.
Physically it is a nice design. With a matt black plastic cover, it is small, sleek and deceptively light. Straight out of the packet (a standard plastic bloister pack) it looks like an ... odd shape, with the two large prongs for the clip beneath it, but once it is fitted it makes a lot more sense.
The clip underneath is designed to fit over the edge of standard office desks. It is strong, and takes a little bit of strength to slide into place, but once it is there it's pretty secure. You may have trouble if your desk has a lip or metal bar under the edge, but otherwise it has worked with everthing from a dining table to standard PC desks. The two prongs are curved underneath to give you room to tuck wires in and keep them tidy under the desk edge, but as someone who changes devices frequently I don't tend to use this feature.
Once it is clipped in place, the top forms a raised V-shape with USB ports on each side, two facing towards the user, two away.These are nicely spaced so collared or oddly shaped USB devices can fit without problems, and the angle makes it very easy to remove or insert devices without fumbling. On the flat side there is a small round socket for the external power supply, if you choose to use it.
It connects to the computer by a USB to mini-USB cable. The mini USB hub is on the side designed to face the user, making it easy to attach and detach. As a USB 2.0 hub, it offers reasonable speeds (480Mbps) and I have used it to transfer and duplicate information simultaneously between multiple external devices on the hub with no notable slowdown.
One of the best features of this hub is the optional external power supply. This is an adaptor designed to connect the hub directly to a mains socket. Used without it, the hub works like a standard USB hub and draws power from the USB connection to the computer. With it attached, the hub can provide additional power for USB devices, reducing strain on your computer's power supply. It is extremely useful for devices like external harddrives and DVD burners which sometimes draw more power than a computer's USB port can provide, and so would otherwise require multiple USB port connections or their own external power supply. This is also extremely useful for laptops, where the battery may otherwise be unable to provide sufficent sustained power for a larger peripheral e.g. external high speed hard drive.
The external power supply also means this device can be used as a charger for USB devices even if it is not connected to a computer. I've used it to recharge wireless console controllers and USB batteries when I didn't want to turn the computer or console on.
No drivers were necessary, it's simply plug and play. I've used it that way with Windows XP and above without problems. Ease of use is very good - the hub can clip almost anywhere, be used with or without the external power supply, is very light, small and easy to carry in a laptop bag, and works plug and play with most computers.
Belkin have now released an upgraded and faster version, which I don't use, which apparently allows the 4 port section to be detached from the base and act as an independant hub. To be honest, I prefer the stability of this version.
This hub, and it's newer version, are available from PC specialist shops, and widely available online. You can find them second hand but since a new hub is under £20 - and now the more recent version has come out, under £15 - you won't really save enough to make it worthwhile.
I've actually never had a problem with this hub, which is a very rare thing for me and computer peripherals, and would recommend it. Read the complete review |
|
Belkin Hi-Speed USB 2.0 4-Port Hub
by Randal
Like most people, there comes a time when you get fed up of trying to reach round the back of your computer to plug yet another device into an usb post. Then eventually, when you've plugged in your mouse, your keyboard, the printer, the phone recharger, the external drive, the webcam etc etc, you find that you've run out of usb ports, ... which is where devices such as this Belkin Hi-Speed USB 2.0 4-Port Hub come in. At around £6 delivered from Amazon, this simple little device is the answer to your usb socket shortage problem.
What is it? In simple terms it is a usb socket multiplier for your computer. It comes with a short connection cable which plugs into the device at one end, and then into a spare usb socket on your computer with the other. Simple enough to fit and the device is self powered from your computer, so no mains plugs or additional leads. But the clever bit is that the device has 4 usb sockets on it. So in effect, by utilising just the one usb socket on the back of your computer, you have now created an additional 4 usb sockets for your computer via this device.
Overall, the build quality is excellent - as you would expect from a Belkin product. Made from a plain matt black plastic overall, it does feel quite sturdy in your hand. On the top, you have a sort of clear plastic lens bit on the top which lights up when power is supplied to the device from your computer and when you have devices plugged in to it. So a clear sign that it is on and working. Of note, Belkin seem to have updated this item from the picture shown on Dooyoo. But put the item into Amazon, and you will see the new version of this hub.
What's it like in use? It works and everything seems to run from it smoothly and quickly. Connected up, it will run devices in low speed (1.5 Mbps), full speed (12 Mbps) and high speed (480 Mbps). Don't worry if those speeds don't mean much to you because pretty much all devices that run from a usb connection will automatically determine what speed they need to run at, suffice to say that if they need to go at high speed, this hub can cater for their needs. At the moment I have a webcam, microphone, printer and usb phone charger all plugged in to this hub and all working together quite happily.
In addition, the device is a USB 2.0 compatable (which is the current standard for most usb devices), but is also backwards compatible for USB 1.1 items (for older usb devices). It also has another clever little addition buried away in the electronics in that it is also fitted with an over current detection and protection system. So if your computer does get a power surge, this device will protect any of your usb components plugged in to it.
Negative points? In terms of performance and build quality, I can't fault it. The only thing that might bug some people is the light on the device, and that would really depend on what sort of computer you have, and where you set that computer up. Some computers keep the usb sockets powered up once you switch off (to allow you to charge items such as mobile phones etc), meaning that the light of this hub will remain on. Not a problem unless you have the computer in your bedroom, because the light can be quite bright, which can be annoying at night when you are trying to sleep. Only way around it is to either cover it up, or switch your computer off at the wall socket at night (and do your bit for the environment by saving power). So just a point to be aware of.
In summary, for around £6, this hub is a real life saver and easily expands the usb socket limits of your computer. With the usual excellent build quality and reliability of Belkin products, this hub is easy to install and use, and hence, you can't really go wrong. So a 5 star recommendation from me.
Review also on Ciao under Randal1. Read the complete review |