Home > Computer > Switch >

Allied Telesis Switchblade AT SBx908


 Allied Telesis Switchblade AT SBx908 Switch

Allied Telesis Switchblade AT SBx908

 
Description: Model ID AT-SBX908-00 / Allied Telesis SwitchBlade AT SBx908 - Switch - 3U - rack-mountable - stackable / The Allied Telesis SwitchBlade x908 industry leading modular switch incorporates eight high-speed 30Gbps expansion bays, delivering a new generation of high performance. The ... more
Allied Telesis Switchblade AT SBx908 ... SwitchBlade x908 provides scalable and versatile switching solutions for today's Enterprise networks.

The highly configurable SwitchBlade x908 3RU modular switch incorporates an advanced IPv4 L3 feature set with wire-speed IPv6 hardware capability, future proofing the network.

The SwitchBlade x908 incorporates the AlliedWare Plus Operating System, using an industry standard Command Line Interface (CLI), facilitating effortless manageability. Featuring dual hot-swap PSUs, an advanced QoS feature set, multicasting support, and LAN resiliency support, the SwitchBlade x908 also provides Service Provider capabilities such as a large L3 route table, and EPSR support.

Stacking between two units is supported via fixed stacking connectors on the rear of the chassis, providing 80Gbps of stacking bandwidth. Stacking of more than two units is via expansion modules (XEMs) on the front panel.

Configurable up to 96 gigabit with PoE1 or up to 16 x 10GbE2 ports. The XEMs are compatible with the x900-24X and x900-12XT/S.

The SwitchBlade x908 incorporates the AlliedWare Plus Operating System, using an industry standard Command Line Interface (CLI), facilitating effortless manageability.

There are no reviews for this product yet

There are no reviews for this product yet.
Be the first to write a premium review for this product.
Plus, if this is in one of our categories of the month you'll also go in the First Reviews Draw for the chance to win a bonus 2500 dooyooMiles.
This is your chance - Tell other people about this product from Allied Telesyn.

Technical Details for Allied Telesis Switchblade AT SBx908

Product DescriptionAllied Telesis SwitchBlade AT SBx908 - switch
Device TypeSwitch - stackable
Form FactorRack-mountable - 3U
Dimensions (WxDxH)44 cm x 45.5 cm x 13.3 cm
Weight14.3 kg
RAM512 MB DDR SDRAM
Flash Memory32 MB
Remote Management ProtocolSNMP 2, RMON 1, RMON 2, SNMP, RMON 3, RMON 9, Telnet, SNMP 3
FeaturesModular design, hot swap module replacement, Layer 3 switching, Layer 2 switching, dynamic IP address assignment , DHCP support, BOOTP support, RARP support, ARP support, VLAN support, IGMP snooping, Syslog support, port mirroring, DiffServ support, IPv6 support, Access Control List (ACL) support, Quality of Service (QoS)
Compliant StandardsIEEE 802.2, IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, IEEE 802.1v

Products similar to Allied Telesis Switchblade AT ...

Ethernet - Fast Ethernet - 8

Ethernet - Fast Ethernet - 9

Ethernet - Fast Ethernet - 16

Ethernet - Fast Ethernet - 24

Ethernet - Fast Ethernet - Gigabit Ethernet - 12

Ethernet - Fast Ethernet - Gigabit Ethernet - 24

More products in Switch
 
Product of the week
Top