Technical Details for Allied Telesyn AT 8848

Allied Telesyn AT 8848

Description: Model ID AT-8848-50 / Allied Telesyn AT 8848 - Switch - 48 ports - EN, Fast EN - 10Base-T, 100Base-TX + 2 x GBIC (empty) - 1 U / The AT-8800 series intelligent workgroup switches deliver high performance switching in a compact 1RU form factor. Available with either 24 or 48 ... more

Allied Telesyn AT 8848 ... 10/100TX Fast Ethernet ports, both models offer two optional Gigabit Ethernet uplink ports and redundant power supply. The AT-8800 series switches build upon proven Rapier and Rapier 'i' switch technology.

AT-8800 series switches have asymmetric bidirectional bandwidth limiting, per port or per QoS traffic class. Bandwidth limiting lets you define throughput levels on an individual client basis. For example, you may want to assign more bandwidth to a campus library than student accommodation. Delivering an industry-leading implementation of this feature, AT-8800 series switches provide the finest bandwidth granulation available in Layer 3 products.

More Allied Telesyn hubs & switches

Technical Details for Allied Telesyn AT 8848

PDF - Print the technical details

General
Device Type	Switch
Enclosure Type	External - 1U
Installed Modules Qty (Max)	0 (installed) / 2 (max)
Width	44 cm
Depth	35 cm
Height	4.4 cm
Localisation	Europe
Processor
Processor	1 ( 1 ) : 400 MHz
Memory
RAM	64 MB SDRAM
Flash Memory	32 MB Flash
Networking
Ports Qty	48 x Ethernet 10Base-T, Ethernet 100Base-TX
Data Transfer Rate	100 Mbps
Data Link Protocol	Ethernet, Fast Ethernet
Routing Protocol	OSPF, RIP-1, RIP-2, BGP, IGMPv2, OSPFv2, static IP routing
Remote Management Protocol	RMON 1, RMON 2, SNMP, RMON 3, RMON 9, Telnet, SNMP 2c, HTTP
Connectivity Technology	Wired
Communication Mode	Half-duplex, full-duplex
Switching Protocol	Ethernet
MAC Address Table Size	8K entries
Status Indicators	Port status, port transmission speed, power, fail
Features	Full duplex capability, Layer 3 switching, DHCP support, auto-negotiation, BOOTP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.1x, IEEE 802.3ac, IEEE 802.1G
Expansion / Connectivity
Expansion Slots Total (Free)	2 ( 2 ) x GBIC Memory
Interfaces	48 x network - Ethernet 10Base-T/100Base-TX - RJ-45 1 x management - RS-232 - 9 pin D-Sub (DB-9)
Miscellaneous
Encryption Algorithm	DES, RSA, IKE, SSL, SHA-1
Authentication Method	Secure Shell (SSH), RADIUS, TACACS, TACACS+
Compliant Standards	FCC Class A certified, CISPR 22 Class A, EN 60950, IEC 61000-3-2, IEC 61000-3-3, VCCI Class A ITE, EN55024, EN55022 Class A, UL 60950, CSA 22.2 No. 60950
Power
Power Device	Power supply - redundant - internal
Installed Qty	1 (installed) / 2 (max)
Voltage Required	AC 120/230 V ( 50 - 60 Hz )
Power Consumption Operational	70 Watt
Manufacturer Warranty
Service & Support	Limited lifetime warranty
Service & Support Details	Limited warranty - lifetime
Environmental Parameters
Min Operating Temperature	0 °C
Max Operating Temperature	50 °C
Humidity Range Operating	0 - 95%

Write a review

Technical Details for Allied Telesyn AT 8848

Overview