|
Cisco MDS 9216 Multilayer Fabric Switch
|
||
Technical Details for Cisco MDS 9216 Multilayer Fabric Switch
PDF - Print the technical details
| General | |
| Device Type | Switch |
| Enclosure Type | Rack-mountable - 3U |
| Installed Modules Qty (Max) | 0 (installed) / 1 (max) |
| Width | 44 cm |
| Depth | 57.5 cm |
| Height | 13.3 cm |
| Networking | |
| Data Transfer Rate | 2.12 Gbps |
| Data Link Protocol | Fibre Channel |
| Fibre Channel | FC-AL, FC-AL-2, FC-BB, FC-DA, FC-FG, FC-FLA, FC-FS, FC-GS, FC-GS-3, FC-GS-4, FC-MI, FC-PH, FC-PH-2, FC-PH-3, FC-PI, FC-PLDA, FC-SB-2, FC-SB-3, FC-SW, FC-SW-2, FC-SW-3, FC-Tape, FC-VI, FC-SP, FC-BB-2, FCP, FCP-2 |
| Remote Management Protocol | SNMP 3 |
| Connectivity Technology | Wired |
| Features | Hot swap module replacement, VLAN support, manageable |
| Expansion / Connectivity | |
| Expansion Slots Total (Free) | 1 ( 1 ) x Expansion Slot 16 ( 16 ) x SFP (mini-GBIC) |
| Interfaces | 1 x management - Ethernet 10Base-T/100Base-TX - RJ-45 1 x serial - RS-232 - 9 pin D-Sub (DB-9) 1 x serial - RS-232 - RJ-45 |
| Miscellaneous | |
| Rack Mounting Kit | Included |
| Authentication Method | RADIUS, Secure Shell v.2 (SSH2) |
| Compliant Standards | NEBS level 3, CE, FCC Class A certified, CISPR 22 Class A, EN 60950, EN 61000-3-2, EN50082, ICES-003, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55024, CSA 22.2 No. 950, EN55022 Class A, UL 60950 |
| Power | |
| Power Device | Power supply - hot-plug / redundant - plug-in module |
| Installed Qty | 2 (installed) / 2 (max) |
| Voltage Required | AC 120/230 V ( 50/60 Hz ) |
| Software / System Requirements | |
| Software Included | Drivers & Utilities |
| Environmental Parameters | |
| Min Operating Temperature | 0 °C |
| Max Operating Temperature | 40 °C |
| Humidity Range Operating | 10 - 90% |


