|
|
||
Technical Details for Cisco Small Business Managed Switch SGE2010
PDF - Print the technical details
| General | |
| Device Type | Switch - stackable |
| Enclosure Type | Rack-mountable - 1U |
| Width | 44 cm |
| Depth | 37.5 cm |
| Height | 4.4 cm |
| Weight | 4.9 kg |
| Networking | |
| Ports Qty | 48 x Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T |
| Max Units In A Stack | 4 |
| Data Transfer Rate | 1 Gbps |
| Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet |
| Routing Protocol | IGMPv2, IGMP |
| Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, SSH |
| Connectivity Technology | Wired |
| Communication Mode | Half-duplex, full-duplex |
| Switching Protocol | Ethernet |
| MAC Address Table Size | 8K entries |
| Status Indicators | Link activity, port transmission speed, power, link OK, Unit ID |
| Features | Auto-sensing per device, DHCP support, auto-negotiation, BOOTP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, DoS attack prevention, port mirroring, Weighted Round Robin (WRR) queuing, MAC address filtering, Broadcast Storm Control, IPv6 support, firmware upgradable, SNTP support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
| Expansion / Connectivity | |
| Expansion Slots Total (Free) | 4 ( 4 ) x SFP (mini-GBIC) |
| Interfaces | 48 x network - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 1 x management - console |
| Miscellaneous | |
| Cables Included | 1 x serial cable |
| Rack Mounting Kit | Included |
| Encryption Algorithm | MD5 |
| Authentication Method | Secure Shell (SSH), RADIUS |
| Compliant Standards | CE, UL 60950, CSA C22.2, FCC CFR47 Part 15 |
| Power | |
| Power Device | Power supply - internal |
| Voltage Required | AC 120/230 V ( 50/60 Hz ) |
| Features | Redundant Power System (RPS) connector |
| Environmental Parameters | |
| Min Operating Temperature | 0 °C |
| Max Operating Temperature | 40 °C |
| Humidity Range Operating | 10 - 90% |



