Home > Computer > Switch >

Technical Details for Netgear ProSafe FSM7352S


Technical Details for Netgear ProSafe FSM7352S Switch
amazon
Netgear ProSafe FSM7352S 
Description: Model ID FSM7352SEU / NETGEAR ProSafe FSM7352S - Switch - 48 ports - EN, Fast EN - 10Base-T, 100Base-TX + 4x10/100/1000Base-T/SFP (mini-GBIC) - 1U / NETGEAR's low-cost, stackable, Fast Ethernet switch delivers maximum throughput and flexibility where you need it - to high-density ... more
Netgear ProSafe FSM7352S ... workgroups at the edge of the network, or in the backbone of small networks. The ProSafe FSM7352S is a managed 48-port switch with auto-sensing 10/100 ports and four 10/100/1000 ports. This enables fiber connectivity through four hot-swappable Small Form-factor Pluggable (SFP) gigabit interfaces. The non-blocking design of the switch delivers simultaneous, full wire-speed, low-latency throughput to all ports. In addition, the 1U rack-mount form factor uses less rack space and provides a lower per-port cost than comparable Fast Ethernet switches.

Technical Details for Netgear ProSafe FSM7352S

PDF - Print the technical details

General
Device TypeSwitch
Enclosure TypeExternal - 1U
Width44 cm
Depth25.7 cm
Height4.3 cm
Weight3.2 kg
Memory
RAM128 MB
Flash Memory16 MB
Networking
Ports Qty48 x Ethernet 10Base-T, Ethernet 100Base-TX
Auxiliary Network Ports4x10/100/1000Base-T/SFP (mini-GBIC)
Data Transfer Rate100 Mbps
Data Link ProtocolEthernet, Fast Ethernet
Routing ProtocolRIP-1, RIP-2, IGMPv2, IGMP
Remote Management ProtocolSNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP
Connectivity TechnologyWired
Switching ProtocolEthernet
FeaturesLayer 3 switching, DHCP support, auto-negotiation, BOOTP support, VLAN support, auto-uplink (auto MDI/MDI-X), manageable, Broadcast Storm Control
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
Expansion / Connectivity
Expansion Slots Total (Free)4 ( 4 ) x SFP (mini-GBIC)
Interfaces48 x network - Ethernet 10Base-T/100Base-TX - RJ-45
1 x management - RS-232 - 9 pin D-Sub (DB-9)
4 x network - Ethernet 1000Base-T - RJ-45
Miscellaneous
Rack Mounting KitIncluded
MTBF117,747 hour(s)
Encryption AlgorithmTLS 1.0, SSL 3.0
Authentication MethodRADIUS
Compliant StandardsCE, FCC Class A certified, C-Tick, VCCI Class A ITE, EN 55020
Power
Power DevicePower supply - internal
Voltage RequiredAC 120/230 V ( 50/60 Hz )
Power Consumption Operational80 Watt
Software / System Requirements
Software IncludedDrivers & Utilities
Manufacturer Warranty
Service & SupportNETGEAR lifetime warranty
Environmental Parameters
Min Operating Temperature0 °C
Max Operating Temperature40 °C
Humidity Range Operating0 - 90%
 
Product of the week
Netgear ProSafe FSM7352S