|
Nortel Ethernet Routing Switch 5510-48T
Ethernet Routing Switch 5510-48T features 48 10/100/1000BASE-T RJ-45 ports for desktop switching and two built-in SFP (Small Form factor Pluggable) GBIC ports for uplink. Port 47 and Port 48 offer configuration flexibility by allowing the network administrator to configure each port as either 10/100/1000 or make use of the built-in GBIC. As many as eight models of the Ethernet Routing Switch 5510-48T can be stacked to achieve up to 384 10/100/1000 ports for high-density desktop switching. |
||
Technical Details for Nortel Ethernet Routing Switch 5510-48T
PDF - Print the technical details
| General | |
| Device Type | Switch - stackable |
| Enclosure Type | External - 1U |
| Width | 43.8 cm |
| Depth | 38.7 cm |
| Height | 4.5 cm |
| Weight | 6 kg |
| Networking | |
| Ports Qty | 48 x Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T |
| Max Units In A Stack | 8 |
| Data Transfer Rate | 1 Gbps |
| Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet |
| Routing Protocol | RIP-1, RIP-2, static IP routing |
| Remote Management Protocol | RMON 2, SNMP, RMON, Telnet, SNMP 3, HTTP |
| Connectivity Technology | Wired |
| Communication Mode | Half-duplex, full-duplex |
| Switching Protocol | Ethernet |
| MAC Address Table Size | 16K entries |
| Status Indicators | Link activity, port transmission speed, port duplex mode, power, status |
| Features | Flow control, full duplex capability, Layer 3 switching, IP-routing, auto-correction of twisted-pair polarity reverse, auto-negotiation, BOOTP support, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, port mirroring, DiffServ support, manageable, stackable, MAC address filtering |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
| Expansion / Connectivity | |
| Expansion Slots Total (Free) | 2 ( 2 ) x SFP (mini-GBIC) |
| Interfaces | 48 x network - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 2 x network stack device 1 x management - 9 pin D-Sub (DB-9) |
| Miscellaneous | |
| Cables Included | 1 x stacking cable - 45.7 cm |
| Authentication Method | Secure Shell (SSH), RADIUS, Secure Shell v.2 (SSH2) |
| Compliant Standards | UL, BSMI CNS 13438 Class A, cUL, EN 60950, EN 61000-3-2, EN55022, NOM, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55024, CSA 22.2 No. 60950, CB, AS/NZ 3548 Class A, ICES-003 Class A, RoHS |
| Power | |
| Power Device | Power supply - internal |
| Voltage Required | AC 120/230 V ( 50/60 Hz ) |
| Power Consumption Operational | 135 Watt |
| Features | Redundant Power System (RPS) connector |
| Environmental Parameters | |
| Min Operating Temperature | 0 °C |
| Max Operating Temperature | 45 °C |
| Humidity Range Operating | 0 - 85% |


