Cnet Powerswitch CNSH-80T

Cnet Powerswitch CNSH-80T ... busy workgroups and offices that are outgrowing their traditional LANs. The CNSH-80T comes with eight, and the CNSH-160T has sixteen UTP ports for convenient network cable attachment. These two PowerSWITCH hubs are shipped ready-to-work: CNet's Plug-&-Done Setup means quick installation with no configuration needed - just attach the power and network cables, then turn the hub on. Right away, the 10BaseT PowerSWITCH can start driving your network faster and more efficiently than ever before.

Wire-speed store-and-forward switching is used to discard bad packets and accurately speed good data to the right destination at up to 14, 880 packets per second per port. The dynamic, shared MAC source address table automatically stores the location of attached devices to insure fast delivery. Latency is kept to a minimum 64 microseconds for 64-byte packets. Each port delivers dedicated bandwidth to its connected device in either normal (Half-Duplex) or no-collision Full-Duplex mode. Aggregate bandwidth on these two hubs can be up 320Mbps - a huge increase over the 10Mbps available from non-switching Ethernet hubs and repeaters. All ports and their status LEDs are conveniently located on the front-panel for quick access. One port on each model is capable of dual standard for Crossover function.