Zyxel Zywall USG-300
Technical Details for Zyxel Zywall USG-300
PDF - Print the technical details| General | |
| Device Type | Security appliance |
| Width | 43 cm |
| Depth | 20.1 cm |
| Height | 4.2 cm |
| Weight | 2.8 kg |
| Processor / Memory / Storage | |
| RAM Installed ( Max ) | 256 MB |
| Flash Memory Installed (Max) | 256 MB |
| Networking | |
| Connectivity Technology | Wired |
| Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet |
| Network / Transport Protocol | PPTP, L2TP, IPSec, PPPoE |
| Routing Protocol | OSPF, RIP-1, RIP-2, IGMPv2, IGMP |
| Remote Management Protocol | Telnet, SNMP 2c, HTTP, HTTPS |
| Communication Mode | Full-duplex |
| Performance | Firewall throughput : 200 Mbps VPN throughput (3DES/AES) : 100 Mbps |
| Capacity | Concurrent sessions : 60000 IPSec VPN tunnels : 200 VPN tunnels : 10 |
| Status Indicators | Port status, power, system |
| Features | Firewall protection, DMZ port, routing, DHCP support, NAT support, VPN support, auto-negotiation, load balancing, LDAP support, auto-uplink (auto MDI/MDI-X), Syslog support, traffic shaping, Stateful Packet Inspection (SPI), DoS attack prevention, content filtering, packet filtering, ALG support, dynamic DNS server, manageable, Intrusion Detection System (IDS), E-mail alert, antivirus analysis, High Availability, Intrusion Prevention System (IPS), URL filtering, firmware upgradable, DDos attack prevention, Quality of Service (QoS), Data prioritization (Qos) for VoIP applications, IPSec passthrough |
| Encryption Algorithm | DES, Triple DES, MD5, AES, IKE, SSL, DH, SHA-1, PKI |
| Authentication Method | Secure Shell (SSH), RADIUS, X.509 certificates, LDAP, Active Directory |
| Compliant Standards | IEEE 802.1Q, X.509 |
| Expansion / Connectivity | |
| Expansion Slot(s) | 2 (total) / 2 (free) x Expansion Slot |
| Interfaces | 7 x network - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 1 x management - RS-232 - 9 pin D-Sub (DB-9) 1 x serial - RS-232 - 9 pin D-Sub (DB-9) 2 x USB - 4 PIN USB Type A |
| Miscellaneous | |
| Rack Mounting Kit | Included |
| Compliant Standards | FCC Class A certified, CSA, ICSA IPSec certified, ICSA Firewall certified, VCCI Class A ITE, CSA 22.2 No. 60950, EMC, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, WEEE, C-Tick Class A |
| Power | |
| Voltage Required | AC 120/230 V ( 50/60 Hz ) |
| Power Consumption Operational | 35 Watt |
| Environmental Parameters | |
| Min Operating Temperature | 0 °C |
| Max Operating Temperature | 50 °C |
| Humidity Range Operating | 20 - 95% |
