Firstly let me just explain why I bought such an expensive pc case. I wanted to house a full size ATX Motherboard and have the capacity and space within the case to enable further upgrades (i.e water cooling system etc). A lot of the standard PC cases out there are restricted to what Water cooling systems you can use and dont house full size ATX Boards. I Had already purchased a Foxconn C51XEM2AA motherboard which boasts a full 12" x 9.6" board. On top of that I wanted to install 8GB of Geil Evo One Gaming memory that had extra fins on top of the memory to enhance cooling. I also had plans for a NVidia Geforce 9800GT Dark Knight graphics card which is a massive piece of kit and needs plenty of room for the fans underneath the card. I had also bought a Thermaltake Big Water Cooling system which has the pump to place inside the case and a radiator and fan which can be fitted either inside or outside the case - fortunatley this case was so large and robust that it could easily take most water cooling systems. This case comes with quick release drive bays (and plenty of them) as well as a 12" front intake fax, 12" rear exhaust fan, 6" rear exhaust fan for by the power supply and also a 6" top exhaust fan to allow heat dissipation through the top of the case.